| Doktora/Sanatta Yeterlilik/Tıpta Uzmanlık, Türkiye, İhsan Doğramacı Bilkent Üniversitesi, Mühendislik ve Fen Bilimleri Enstitüsü, Makine Mühendisliği (Dr), 2011, 2016 |
| Yüksek Lisans, İran, University Of Tabriz, , 2005, 2007 |
| Lisans, İran, University Of Applied Science And Technology, Manufacturing Engineering, , 2001, 2005 |
| İngilizce, e-YDS, 85, 2016 |
| Kayıt Yok |
| [UAK] Mühendislik Makine Mühendisliği Üretim Teknolojileri |
| [UAK] Mühendislik Makine Mühendisliği Sonlu Elemanlar Analizi |
| [UAK] Mühendislik Makine Mühendisliği Eklemeli İmalat |
| 2023-, Doçent, Tam Zamanlı, Çankaya Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye |
| 2020-, Doktor Öğretim Üyesi, Tam Zamanlı, Çankaya Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye |
| 2017-2020, Doktor Öğretim Üyesi, Tam Zamanlı, Atılım Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye |
| Kayıt Yok |
| Selen Aydoğan, Yüksek Lisans, Design and simulation of a recycled rubber sandwiched structural battery, Çankaya Üniversitesi, Lisansüstü Eğitim Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman) |
| Gaye Koçak, Yüksek Lisans, Simulation and Experimental investigation of White-layer Formation in Steels, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman) |
| Okay Gezer, Doktora, An energy recovered and educational purposed mechanical powertrain test rig and digital twin install, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman) |
| Ülviye Savaş, Yüksek Lisans, Farklı koşullarda üretilmiş PDMS malzemelerin mekanik davranışlarını belirlemek için malzeme modeli, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman) |
| İrem Gül Aslanbaş, Doktora, MODELLING OF SUPERFINISHING PROCESS OF BALL BEARINGS, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman) |
| Okan Yüksel Fındıklı, Yüksek Lisans, Cutting Force Prediction By Machine Learning, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Mühendislik Bilimleri Ana Bilim Dalı, 2023, (Asıl Danışman) |
| Waleed Jehad Mohammad Odeıbat, Yüksek Lisans, FINITE ELEMENT ANALYSIS OF STRAIN DISTRIBUTION ON A PDMS MEMBRANE, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman) |
| Mustafa Özkara, Yüksek Lisans, TOPOLOGY OPTIMIZATION OF AN AIRCRAFT STRUCTURAL PART FOR ADDITIVE MANUFACTURING, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman) |
| Mohammed Sahıb, Yüksek Lisans, Designing and developing a digital light processing based stereolithography 3D printer, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, Bilgisayar Mühendisliği Ana Bilim Dalı, 2020, (Asıl Danışman) |
| Okan Deniz Yılmaz, Yüksek Lisans, Prediction of shear localization onset in machining of ti-6al-4v, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2020, (Asıl Danışman) |
| Hassan Ali M. Meshri, Yüksek Lisans, An investigations into the micro wire electrical discharge machining of shape memory alloy, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, İmalat Mühendisliği Ana Bilim Dalı, 2019, (Asıl Danışman) |
| Nakka Lotfy Rake Rake, Yüksek Lisans, Finite element modeling of machining particle reinforced aluminum metal matrix composites, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, İmalat Mühendisliği Ana Bilim Dalı, 2018, (Asıl Danışman) |
| 2020-2021, ME452-Welding Technologies, Lisans |
| 2020-2021, ME210-Manufacturing Processes, Lisans |
| 2020-2021, ME648-Nontraditional Machining Processes, Doktora/Sanatta Yeterlilik/Tıpta Uzmanlık |
| 2020-2021, ME408-Innovative Engineering Design and Implementation, Lisans |
| 2020-2021, ME407-Innovative Engineering Analysis and Design, Lisans |
| 2019-2020, ME403-Mechanical System Design, Lisans |
| 2019-2020, ME452-Introduction to Fluid Power Control, Lisans |
| 2019-2020, MFGE108-Introduction to Computer Aided Solid Modeling, Lisans |
| 2019-2020, ME407-Innovative Engineering Analysis and Design, Lisans |
| 2019-2020, ME 312- Experimentation and Measurement, Lisans |
| 2019-2020, ME 402-Introduction to Finite Element Analysis, Lisans |
| 2019-2020, ME 210-Manufacturing Processes, Lisans |
| 2018-2019, ME452: Introduction to Fluid Power Control, Lisans |
| 2018-2019, ME403: Mechanical Systems Design, Lisans |
| 2018-2019, MFGE108: Introduction to Computer Aided Solid Modeling, Lisans |
| 2018-2019, MFGE205: Introduction to Manufacturing Processes, Lisans |
| 2018-2019, ME404: Design Project, Lisans |
| 2017-2018, ME452: Introduction to Fluid Power Control, Lisans |
| 2017-2018, MFGE108: Introduction to Computer Aided Solid Modeling, Lisans |
| 2017-2018, MFGE205: Introduction to Manufacturing Processes, Lisans |
| 2017-2018, ME425: Mechanical Vibrations, Lisans |
| Kayıt Yok |
| Yüksek Performanslı Hücre Germe Cihazı Geliştirilmesi (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Araştırmacı , 2021 |
| Yüksek Performanslı Hücre Germe Cihazı Geliştirilmesi (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Araştırmacı , 2021 |
| Kesici Kenarı Yapılandırılmış Elmas Takımlar İle Geniş Yüzeylere Nano Ölçekte İşleme Yapılması (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Bursiyer , 2015-2017 |
| Mikro Kesici Takım Tasarım, Üretim Ve Geliştirilmes (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Bursiyer , 2011-2014 |
| Uçak Yapılarının Ve Yapısal Test Adetlerinin Olasılıksal Yöntemler Kullanarak Eşzamanlı Optimizasyonu (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Bursiyer , 2010-2013 |
| Kayıt Yok |
| Totuk, O.H., Selvi, Ö., Akar, S. (2023) "Fused filament fabrication in CAD education: A closed-loop approach", International Journal of Mechanical Engineering Education, (0) DOI |
| Namlu, R.H., Lotfısadıgh, B., Kılıç, S.E., Yılmaz, O.D., Akar, S. (2023) "Combined use of ultrasonic-assisted drilling and minimum quantity lubrication for drilling of NiTi shape memory alloy", Informa UK Limited, 27 (0) [SCI Expanded] DOI |
| Akar, S., Aylı, Ü.E., Ulucak, O., Uğurer, D. (2023) "Prediction of the onset of shear localization based on machine learning", Cambridge University Press (CUP), 37 (0) [SCI Expanded] DOI |
| Emami, M., Nasab, V.H., Akar, S., Batako, A. (2023) "Experimental investigation into the effect of magnetorheological fluid damper on vibration and chatter in straight turning process", Journal of Manufacturing Processes, 99 (0) [SCI Expanded] DOI |
| Akar, S., Seyedzavvar, M., Boğa, C. (2023) "A study on the μwire-EDM of Ni55.8Ti shape memory superalloy: an experimental investigation and a hybrid ANN/PSO approach for optimization", Journal of the Brazilian Society of Mechanical Sciences and Engineering, (0) [SCI Expanded] Link DOI |
| Khatir, F.A., Sadeghi, M.H., Akar, S. (2022) "Investigation of surface integrity in laser-assisted turning of AISI 4340 hardened steel: Finite element simulation with experimental verification", Optics & Laser Technology, 147 (0) [SCI Expanded] DOI |
| Seyedzavvar, M., Boğa, C., Akar, S., Pashmforoush, F. (2021) "Molecular dynamic approach to predict thermo-mechanical properties of poly(butylene terephthalate)/CaCO3 nanocomposites", Materials Today Communications, 28 (0) [SCI Expanded] DOI |
| Meshri, H.A.M., Akar, S., Seyedzavvar, M., Kiliç, S.E. (2021) "Micro-WEDM of Ni55.8Ti shape memory superalloy: experimental investigation and optimisation", International Journal of Mechatronics and Manufacturing Systems, 14 (1) pp. 18-38 Link DOI |
| Ilkhchi, R.N., Akar, S., Meshri, H.A.M., Seyedzavvar, M. (2021) "Prediction of white layer formation in μ-WEDM process of NiTi shape memory superalloy: FEM with experimental verification", The International Journal of Advanced Manufacturing Technology, (0) [SCI Expanded] DOI |
| Kahtir, F.A., Sadeghi, M.H., Akar, S. (2021) "Investigation of surface integrity in the laser-assisted turning of AISI 4340 hardened steel", Journal of Manufacturing Processes, 61 (0) [SCI Expanded] DOI |
| Yılmaz, O.D., Oliaei, S.N.B. (2020) "Effect of constitutive material model on the finite element simulation of shear localization onset", Simulation Modelling Practice and Theory, (0) [SCI Expanded] Link |
| Sadizade, B., Araee, A., Oliaei, S.N.B., Farshi, V.R. (2020) "Plateau honing of a diesel engine cylinder with special topography and reasonable machining time", TRIBOLOGY INTERNATIONAL, 146 (0) [SCI Expanded] Link DOI |
| Yılmaz, O.D., Oliaei, S.N.B. (2020) "An Investigation into the Effect of Cutting Tool Geometry on the Formation of Serrated Chips during Machining of Ti-6Al-4V: Finite Element Approach", Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, 11 (3) pp. 1131-1138 [TR Dizin] Link DOI |
| Oliaei, S.N.B., Karpat, Y. (2019) "Modelling and analysis of tool deflections in tailored micro end mills", International Journal of Mechatronics and Manufacturing Systems, 12 (1) p. 20 Link |
| Ayan, A., Turkay, D., Unlu, B., Naghinazhadahmadi, P., Oliaei, S.N.B., Boztug, C., Yerci, S. (2019) "Strain Engineering of Germanium Nanobeams by Electrostatic Actuation", SCIENTIFIC REPORTS, 9 (0) [SCI Expanded] Link DOI |
| Oliaei, S.N.B., Karpat, Y. (2018) "Polycrystalline diamond end mill cutting edge design to improve ductile-mode machining of silicon", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 51 (0) pp. 403-414 [SCI Expanded] Link DOI |
| Karpat, Y., Kanlı, M., Oliaei, S.N.B. (2018) "Mechanistic modeling of micro milling including tool run-out", Journal of the Faculty of Engineering and Architecture of Gazi University, 2018 (2018) pp. 771-781 [TR Dizin] Link |
| Oliaei, S.N.B., Karpat, Y., Paulo, D.J., Perveen, A. (2018) "Micro tool design and fabrication: A review", Journal of Manufacturing Processes, 36 (0) pp. 496-519 [SCI Expanded] Link |
| Oliaei, S.N.B., Karpat, Y. (2017) "Investigating the influence of friction conditions on finite element simulation of microscale machining with the presence of built-up edge", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 90 (0) pp. 819-829 [SCI Expanded] Link DOI |
| Oliaei, S.N.B., Karpat, Y. (2017) "Built-up edge effects on process outputs of titanium alloy micro milling", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 49 (0) pp. 305-315 [SCI Expanded] Link DOI |
| Jafarı, R., Kahya, M., Oliaei, S.N.B., Unver, H.O., Ozyurt, T.O. (2017) "Modeling and analysis of surface roughness of microchannels produced by mu-WEDM using an ANN and Taguchi method", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 31 (11) pp. 5447-5457 [SCI Expanded] Link DOI |
| Oliaei, S.N.B., Karpat, Y. (2016) "Influence of tool wear on machining forces and tool deflections during micro milling", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 84 (0) pp. 1963-1980 [SCI Expanded] Link DOI |
| Yavuz, C., Oliaei, S.N.B., Çetin, B., Çeliktaş, Ö.Y. (2016) "Sterilization of PMMA microfluidic chips by various techniques and investigation of material characteristics", JOURNAL OF SUPERCRITICAL FLUIDS, 107 (0) pp. 114-121 [SCI Expanded] Link DOI |
| Oliaei, S.N.B., Karpat, Y. (2016) "Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 235 (0) pp. 28-40 [SCI Expanded] Link DOI |
| Zeinali, S., Çetin, B., Oliaei, S.N.B., Karpat, Y. (2015) "Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining", ELECTROPHORESIS, 36 (13) pp. 1432-1442 [SCI Expanded] Link DOI |
| Kalajahi, M.H., Ahmadi, S.R., Oliaei, S.N.B. (2013) "Experimental and finite element analysis of EDM process and investigation of material removal rate by response surface methodology", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 69 (0) pp. 687-704 [SCI Expanded] DOI |
| Shabgard, M., Ahmadi, R., Seyedzavvar, M., Oliaei, S.N.B. (2013) "Mathematical and numerical modeling of the effect of input-parameters on the flushing efficiency of plasma channel in EDM process", INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, 65 (0) pp. 79-87 [SCI Expanded] DOI |
| Shabgard, M., Oliaei, S.N.B., Seyedzavvar, M., Najadebrahimi, A. (2011) "Experimental investigation and 3D finite element prediction of the white layer thickness, heat affected zone, and surface roughness in EDM process", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 25 (12) pp. 3173-3183 [SCI Expanded] DOI |
| Shabgard, M., Mirsadegh, S., Oliaei, S.N.B. (2011) "Influence of Input Parameters on the Characteristics of the EDM Process", STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 57 (9) pp. 689-696 [SCI Expanded] DOI |
| Shabgard, M.R., Seyedzavvar, M., Oliaei, S.N.B. (2011) "A numerical method for predicting depth of heat affected zone in EDM process for AISI H13 tool steel", JOURNAL OF SCIENTIFIC INDUSTRIAL RESEARCH, 70 (7) pp. 493-499 [SCI Expanded] |
| Oliaei, S.N.B., Jafarı, R., Rohani, B., Mostafapour, A. (2008) "Investigation and Analysis of Weld Induced Residual Stresses in Two Dissimilar Pipes by Finite Element Modeling", Journal of Applied Sciences, 8 (6) pp. 1014-1020 Link |
| Düz, N.B., Vargeloğlu, S., Yay, M.E., Çolak, Ö., Odeibat, W., Şahin, S., Uyanık, İ., Akar, S., Dinçer, P.R. (2021) "Yüksek Performanslı Hücre Germe Cihazı Geliştirilmesi", Tıbbi Biyoloji ve Genetik Kongresi , Çevrimiçi, Türkiye, (Ekim 2021) |
| Kahtir, F.A., Sadeghi, M.H., Akar, S. (2020) "Investigation of Surface Roughness in Laser-Assisted Hard Turning of AISI 4340", International Conference Exposition on Mechanical, Material and Manufacturing Technology , Hayderabad, Hindistan, (Ekim 2020) |
| Lotfi, N.R., Oliaei, S.N.B., Kilic, S.E. (2018) "FINITE ELEMENT MODELING OF MACHINING PARTICLE-REINFORCED ALUMINUM METAL MATRIX COMPOSITES", The 18th International Conference on Machine Design and Production , Türkiye, (Temmuz 2018) |
| Yılmaz, O.D., Oliaei, S.N.B., Dadvandipour, S. (2018) "PERFORMANCE ANALYSIS OF MICRO-END MILLS BASED ON VIBRATION APPLYING COMPUTER AIDED DESIGN ANALYSIS", The 6thInternational Scientific Conference on Advancesin Mechanical Engineering (ISCAME 2018) , (Ekim 2018) |
| Samad, D., Oliaei, S.N.B. (2018) "On the digital manufacturing development applying engineering informatics as a discipline of field study", 2018 19th International Carpathian Control Conference (ICCC) , (pp. 492-497), Szilvasvarad, Macaristan, (Haziran 2018) |
| Sadigh, B.L., Oliaei, S.N.B., Dadvandipour, S. (2017) "An Ontology Based Semantic Machine Tool Selection for Multi Scale Wire EDM Processes", 9th International Congress on Precision Machining (ICPM 2017) , (Ağustos 2017) |
| Eivazzadeh, M., Dadvandipour, S., Oliaei, S.N.B. (2017) "FINITE ELEMENT MODELING OF INCREMENTAL SHEET METAL FORMING OF ALUMINUM ALLOY AL 1100", XIV International Congress Machines.Technologies.Materials-Summer Session , (Eylül 2017) |
| Oliaei, S.N.B., Karpat, Y. (2016) "Fabrication of PCD Mechanical Planarization Tools by using mu-Wire Electrical Discharge Machining", 18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) , (pp. 311-316), Tokyo, Japonya, (Nisan 2016) |
| Oliaei, S.N.B., Karpat, Y. (2016) "Influence of WEDM Strategies on Surface Roughness of Tungsten Carbide", The 17th International Conference on Machine Design and Production , Türkiye, (Temmuz 2016) |
| Oliaei, S.N.B., Karpat, Y. (2014) "Experimental Investigations on Micro Milling of Stavax Stainless Steel", 6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) , (pp. 377-382), Berkeley, Amerika Birleşik Devletleri, (Haziran 2014) |
| Oliaei, S.N.B., Özdemir, C., Karpat, Y. (2013) "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", 7th International Conference and Exhibition on Design andProduction of MACHINES and DIES/MOLDS , Türkiye, (Haziran 2013) |
| Oliaei, S.N.B., Karpat, Y. (2012) "Multi-scale Milling Force Modeling through a Finite Element Simulation Based Metamodel", 15th International Conference on Machine Design and Production (UMTIK) , Türkiye, (Haziran 2012) |
| Karimzadeh, A., Yousefi, A., Hosseini, M., Jafarı, R., Oliaei, S.N.B. (2012) "Analysis of the Effect of Residual Stresses on Fatigue Life of Tubular Members by Finite Element Modeling", 15th International Conference on Machine Design and Production (UMTIK) , Pamukkale, Türkiye, (Haziran 2012) |
| Ergür, A., Oliaei, S.N.B., Karpat, Y. (2012) "Design and Fabrication of Micro Cutting Tools Using Micro Electro Discharge Machining (μ-EDM)", 15th International Conference on Machine Design and Production , Pamukkale, Türkiye, (Haziran 2012) |
| Dolatshahi, H., Oliaei, S.N.B., Sattari, M. (2011) "Finite Element Analysis of the Effect of Crater Wear on Machining Forces and Temperature", 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds , Ankara, Türkiye, (Haziran 2011) |
| Dadvandipour, S., Shotorbani, R., Oliaei, S.N.B. (2008) "Examination of Machining Parameters on the Machining Characteristics in EDM of Tool Steel with Different Type of Electrode Materials", The 13th International Conference on Machine Design and Production , Istanbul, Türkiye, (Eylül 2008) |
| Oliaei, S.N.B., Ahmadı, P.N., Rohani, B., Shotorbanı, R.M. (2008) "Numerical Simulation of Temperature Field and Residual Stresses in Multi-Pass T-Fillet Joint by Finite Element Method", The 13th International Conference on Machine Design and Production , (Eylül 2008) |
| Jafarı, R., Sadigh, B.L., Rohani, B., Oliaei, S.N.B. (2008) "ANALYSIS AND SIMULATION OF ON-LINE TOOL BREAKAGE DETECTION FROM FEED DRIVE CURRENT IN CNC LATHE", The 13th International Conference on Machine Design and Production , Istanbul, Türkiye, (Eylül 2008) |
| Kayıt Yok |
| Nasseri, B., Akar, S., Naseri, E. (2021) "Biomedical Applications of Microfluidic Devices", : Elsevier-Academic Press |
| Perveen, A., Akar, S. (2020) "Spark Erosion Machining MEMS to Aerospace", Amerika Birleşik Devletleri : CRC Press |
| Oliaei, S.N.B., Mukhtarkhanov, M., Perveen, A. (2020) "Advances in Abrasive BasedMachining and FinishingProcesses", : Springer |
| Oliaei, S.N.B., Nasseri, B. (2019) "Additive and Subtractive Manufacturing-Emergent Technologies", : DE GRUYTER |
| Oliaei, S.N.B., P, J.M., Perveen, A. (2018) "Micro-electrical Discharge Machining Processes", : Springer |
| Kayıt Yok |
| Kayıt Yok |
| Kayıt Yok |
| Kayıt Yok |
| (2018) "Yeni Fikirler Yeni İşler (Takim: Microsolar)" T.C. Enerji Piyasası Düzenleme Kurumu (EPDK) ve Elektrik Dağıtım Hizmetleri Derneği (ELDER) |
| Kayıt Yok |
| Kayıt Yok |
| Kayıt Yok |
| Birlikte çalışılan kişi | Aktif Dönem | Çalışma Sayısı |
-
|
2023 | 1 |
|
-
|
2023 | 1 |
|
-
|
2023 | 1 |
|
Yiğit Karpat
İhsan Doğramacı Bilkent Üniversitesi
|
2012 - 2019 | 15 |
|
Rahım Jafarı
Atılım Üniversitesi
|
2008 - 2017 | 4 |
|
Okan Deniz Yılmaz
Atılım Üniversitesi
|
2018 - 2023 | 4 |
|
Mırsadegh Seyedzavvar
Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi
|
2021 - 2023 | 4 |
|
Asma Perveen
-
|
2018 - 2020 | 4 |
|
Samad Dadvandipour
-
|
2008 - 2018 | 4 |
|
Babak Rohani
-
|
2008 | 3 |
|
Mohammad Hossein Sadeghi
-
|
2020 - 2022 | 3 |
|
Mohammadreza Shabgard
-
|
2011 - 2013 | 3 |
|
Cem Boğa
Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi
|
2021 - 2023 | 2 |
|
Barbaros Çetin
İhsan Doğramacı Bilkent Üniversitesi
|
2015 - 2016 | 2 |
|
Bahram Lotfi Sadigh
-
|
2008 - 2017 | 2 |
|
Behzad Nasseri
-
|
2019 - 2021 | 2 |
|
Farzad Ahmadi Kahtir
-
|
2020 - 2021 | 2 |
|
Hassan Ali M. Meshri
-
|
2021 | 2 |
|
Mirsadegh Seyedzavvar
-
|
2011 - 2013 | 2 |
|
Özlem Yeşil Çeliktaş
Ege Üniversitesi
|
2016 | 1 |
|
Pervin Rukiye Dinçer
Hacettepe Üniversitesi
|
2021 | 1 |
|
Selçuk Yerci
Orta Doğu Teknik Üniversitesi
|
2019 | 1 |
|
Samad Nadimi Bavil Oliaei
-
|
2011 | 1 |
|
Bahram Lotfısadıgh
-
|
2023 | 1 |
|
Ramazan Hakkı Namlu
-
|
2023 | 1 |
|
İsmail Uyanık
Hacettepe Üniversitesi
|
2021 | 1 |
|
Oğuzhan Ulucak
-
|
2023 | 1 |
|
Abdoullah Yousefi
-
|
2012 | 1 |
|
Ahmad Najadebrahimi
-
|
2011 | 1 |
|
Ali Karimzadeh
-
|
2012 | 1 |
|
Alican Ergür
-
|
2012 | 1 |
|
Alireza Araee
-
|
2020 | 1 |
|
Amir Mostafapour
-
|
2008 | 1 |
|
Andre Batako
-
|
2023 | 1 |
|
Arman Ayan
-
|
2019 | 1 |
|
Babak Sadizade
-
|
2020 | 1 |
|
Buse Unlu
-
|
2019 | 1 |
|
Cansu Yavuz
-
|
2016 | 1 |
|
Cem Özdemir
-
|
2013 | 1 |
|
Cicek Boztug
-
|
2019 | 1 |
|
Dadvandipour Samad
-
|
2018 | 1 |
|
Davim J Paulo
-
|
2018 | 1 |
|
Deniz Turkay
-
|
2019 | 1 |
|
Doruk Uğurer
-
|
2023 | 1 |
|
Erdinc Naseri
-
|
2021 | 1 |
|
Farzad Ahmadi Khatir
-
|
2022 | 1 |
|
Farzad Pashmforoush
-
|
2021 | 1 |
|
Habib Dolatshahi
-
|
2011 | 1 |
|
Hakki Ozgur Unver
-
|
2017 | 1 |
|
Jahan Muhammad P
-
|
2018 | 1 |
|
M. Seyedzavvar
-
|
2011 | 1 |
|
Mahmoudreza Eivazzadeh
-
|
2017 | 1 |
|
Mahyar Sattari
-
|
2011 | 1 |
|
Mehrdad Hosseini
-
|
2012 | 1 |
|
Mehrdad Hosseini Kalajahi
-
|
2013 | 1 |
|
Mohsen Emami
-
|
2023 | 1 |
|
Muammer Kanlı
-
|
2018 | 1 |
|
Muge Kahya
-
|
2017 | 1 |
|
Muslim Mukhtarkhanov
-
|
2020 | 1 |
|
Mustafa Ensar Yay
-
|
2021 | 1 |
|
Nakka Rake Lotfi
-
|
2018 | 1 |
|
Niloufar Boustanabadimaralan Düz
-
|
2021 | 1 |
|
Ömer Çolak
-
|
2021 | 1 |
|
Parisa Naghinazhadahmadi
-
|
2019 | 1 |
|
Parisa Naghinejad Ahmadı
-
|
2008 | 1 |
|
Ramin Mohammadpour Shotorbanı
-
|
2008 | 1 |
|
Ramin Shotorbani
-
|
2008 | 1 |
|
Reza Ahmadi
-
|
2013 | 1 |
|
Reza Najati Ilkhchi
-
|
2021 | 1 |
|
Sadik Engin Kılıç
-
|
2023 | 1 |
|
Sadik Engin Kilic
-
|
2018 | 1 |
|
Sadik Engin Kiliç
-
|
2021 | 1 |
|
Samrand Rash Ahmadi
-
|
2013 | 1 |
|
Selman Şahin
-
|
2021 | 1 |
|
Seyedzavvar Mirsadegh
-
|
2011 | 1 |
|
Sinan Vargeloğlu
-
|
2021 | 1 |
|
Soheila Zeinali
-
|
2015 | 1 |
|
Tuba Okutucu Ozyurt
-
|
2017 | 1 |
|
Vahid Hasan Nasab
-
|
2023 | 1 |
|
Vahid Rezaeizad Farshi
-
|
2020 | 1 |
|
Waleed Odeibat
-
|
2021 | 1 |
