img

Doç. Dr. Samet AKAR

  • Mühendislik Fakültesi
  • Makine Mühendisliği Bölümü
  • -

Yayınlar

Alınan Eğitimler
Doktora/Sanatta Yeterlilik/Tıpta Uzmanlık, Türkiye, İhsan Doğramacı Bilkent Üniversitesi, Mühendislik ve Fen Bilimleri Enstitüsü, Makine Mühendisliği (Dr), 2011, 2016
Yüksek Lisans, İran, University Of Tabriz, , 2005, 2007
Lisans, İran, University Of Applied Science And Technology, Manufacturing Engineering, , 2001, 2005
Yabancı Dil
İngilizce, e-YDS, 85, 2016
Alınan Sertifikalar/Kurslar
Kayıt Yok
[UAK] Mühendislik Makine Mühendisliği Üretim Teknolojileri
[UAK] Mühendislik Makine Mühendisliği Sonlu Elemanlar Analizi
[UAK] Mühendislik Makine Mühendisliği Eklemeli İmalat
Akademik Ünvanlar
2023-, Doçent, Tam Zamanlı, Çankaya Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye
2020-, Doktor Öğretim Üyesi, Tam Zamanlı, Çankaya Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye
2017-2020, Doktor Öğretim Üyesi, Tam Zamanlı, Atılım Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye
Mesleki ve İdari Deneyim
Kayıt Yok
Yönetilen Tezler
Selen Aydoğan, Yüksek Lisans, Design and simulation of a recycled rubber sandwiched structural battery, Çankaya Üniversitesi, Lisansüstü Eğitim Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman)
Gaye Koçak, Yüksek Lisans, Simulation and Experimental investigation of White-layer Formation in Steels, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman)
Okay Gezer, Doktora, An energy recovered and educational purposed mechanical powertrain test rig and digital twin install, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman)
Ülviye Savaş, Yüksek Lisans, Farklı koşullarda üretilmiş PDMS malzemelerin mekanik davranışlarını belirlemek için malzeme modeli, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman)
İrem Gül Aslanbaş, Doktora, MODELLING OF SUPERFINISHING PROCESS OF BALL BEARINGS, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman)
Okan Yüksel Fındıklı, Yüksek Lisans, Cutting Force Prediction By Machine Learning, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Mühendislik Bilimleri Ana Bilim Dalı, 2023, (Asıl Danışman)
Waleed Jehad Mohammad Odeıbat, Yüksek Lisans, FINITE ELEMENT ANALYSIS OF STRAIN DISTRIBUTION ON A PDMS MEMBRANE, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman)
Mustafa Özkara, Yüksek Lisans, TOPOLOGY OPTIMIZATION OF AN AIRCRAFT STRUCTURAL PART FOR ADDITIVE MANUFACTURING, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman)
Mohammed Sahıb, Yüksek Lisans, Designing and developing a digital light processing based stereolithography 3D printer, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, Bilgisayar Mühendisliği Ana Bilim Dalı, 2020, (Asıl Danışman)
Okan Deniz Yılmaz, Yüksek Lisans, Prediction of shear localization onset in machining of ti-6al-4v, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2020, (Asıl Danışman)
Hassan Ali M. Meshri, Yüksek Lisans, An investigations into the micro wire electrical discharge machining of shape memory alloy, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, İmalat Mühendisliği Ana Bilim Dalı, 2019, (Asıl Danışman)
Nakka Lotfy Rake Rake, Yüksek Lisans, Finite element modeling of machining particle reinforced aluminum metal matrix composites, Atılım Üniversitesi, Fen Bilimleri Enstitüsü, İmalat Mühendisliği Ana Bilim Dalı, 2018, (Asıl Danışman)
Verilen Dersler
2020-2021, ME452-Welding Technologies, Lisans
2020-2021, ME210-Manufacturing Processes, Lisans
2020-2021, ME648-Nontraditional Machining Processes, Doktora/Sanatta Yeterlilik/Tıpta Uzmanlık
2020-2021, ME408-Innovative Engineering Design and Implementation, Lisans
2020-2021, ME407-Innovative Engineering Analysis and Design, Lisans
2019-2020, ME403-Mechanical System Design, Lisans
2019-2020, ME452-Introduction to Fluid Power Control, Lisans
2019-2020, MFGE108-Introduction to Computer Aided Solid Modeling, Lisans
2019-2020, ME407-Innovative Engineering Analysis and Design, Lisans
2019-2020, ME 312- Experimentation and Measurement, Lisans
2019-2020, ME 402-Introduction to Finite Element Analysis, Lisans
2019-2020, ME 210-Manufacturing Processes, Lisans
2018-2019, ME452: Introduction to Fluid Power Control, Lisans
2018-2019, ME403: Mechanical Systems Design, Lisans
2018-2019, MFGE108: Introduction to Computer Aided Solid Modeling, Lisans
2018-2019, MFGE205: Introduction to Manufacturing Processes, Lisans
2018-2019, ME404: Design Project, Lisans
2017-2018, ME452: Introduction to Fluid Power Control, Lisans
2017-2018, MFGE108: Introduction to Computer Aided Solid Modeling, Lisans
2017-2018, MFGE205: Introduction to Manufacturing Processes, Lisans
2017-2018, ME425: Mechanical Vibrations, Lisans
Araştırma Deneyimi
Kayıt Yok
Projeler
Yüksek Performanslı Hücre Germe Cihazı Geliştirilmesi (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Araştırmacı , 2021
Yüksek Performanslı Hücre Germe Cihazı Geliştirilmesi (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Araştırmacı , 2021
Kesici Kenarı Yapılandırılmış Elmas Takımlar İle Geniş Yüzeylere Nano Ölçekte İşleme Yapılması (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Bursiyer , 2015-2017
Mikro Kesici Takım Tasarım, Üretim Ve Geliştirilmes (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Bursiyer , 2011-2014
Uçak Yapılarının Ve Yapısal Test Adetlerinin Olasılıksal Yöntemler Kullanarak Eşzamanlı Optimizasyonu (Ulusal) TÜBA ve TÜBİTAK Destekli Proje: Bursiyer , 2010-2013
Fikri Mülkiyetler
Kayıt Yok
Makaleler
Totuk, O.H., Selvi, Ö., Akar, S. (2023) "Fused filament fabrication in CAD education: A closed-loop approach", International Journal of Mechanical Engineering Education, (0) DOI
Namlu, R.H., Lotfısadıgh, B., Kılıç, S.E., Yılmaz, O.D., Akar, S. (2023) "Combined use of ultrasonic-assisted drilling and minimum quantity lubrication for drilling of NiTi shape memory alloy", Informa UK Limited, 27 (0) [SCI Expanded] DOI
Akar, S., Aylı, Ü.E., Ulucak, O., Uğurer, D. (2023) "Prediction of the onset of shear localization based on machine learning", Cambridge University Press (CUP), 37 (0) [SCI Expanded] DOI
Emami, M., Nasab, V.H., Akar, S., Batako, A. (2023) "Experimental investigation into the effect of magnetorheological fluid damper on vibration and chatter in straight turning process", Journal of Manufacturing Processes, 99 (0) [SCI Expanded] DOI
Akar, S., Seyedzavvar, M., Boğa, C. (2023) "A study on the μwire-EDM of Ni55.8Ti shape memory superalloy: an experimental investigation and a hybrid ANN/PSO approach for optimization", Journal of the Brazilian Society of Mechanical Sciences and Engineering, (0) [SCI Expanded] Link DOI
Khatir, F.A., Sadeghi, M.H., Akar, S. (2022) "Investigation of surface integrity in laser-assisted turning of AISI 4340 hardened steel: Finite element simulation with experimental verification", Optics & Laser Technology, 147 (0) [SCI Expanded] DOI
Seyedzavvar, M., Boğa, C., Akar, S., Pashmforoush, F. (2021) "Molecular dynamic approach to predict thermo-mechanical properties of poly(butylene terephthalate)/CaCO3 nanocomposites", Materials Today Communications, 28 (0) [SCI Expanded] DOI
Meshri, H.A.M., Akar, S., Seyedzavvar, M., Kiliç, S.E. (2021) "Micro-WEDM of Ni55.8Ti shape memory superalloy: experimental investigation and optimisation", International Journal of Mechatronics and Manufacturing Systems, 14 (1) pp. 18-38 Link DOI
Ilkhchi, R.N., Akar, S., Meshri, H.A.M., Seyedzavvar, M. (2021) "Prediction of white layer formation in μ-WEDM process of NiTi shape memory superalloy: FEM with experimental verification", The International Journal of Advanced Manufacturing Technology, (0) [SCI Expanded] DOI
Kahtir, F.A., Sadeghi, M.H., Akar, S. (2021) "Investigation of surface integrity in the laser-assisted turning of AISI 4340 hardened steel", Journal of Manufacturing Processes, 61 (0) [SCI Expanded] DOI
Yılmaz, O.D., Oliaei, S.N.B. (2020) "Effect of constitutive material model on the finite element simulation of shear localization onset", Simulation Modelling Practice and Theory, (0) [SCI Expanded] Link
Sadizade, B., Araee, A., Oliaei, S.N.B., Farshi, V.R. (2020) "Plateau honing of a diesel engine cylinder with special topography and reasonable machining time", TRIBOLOGY INTERNATIONAL, 146 (0) [SCI Expanded] Link DOI
Yılmaz, O.D., Oliaei, S.N.B. (2020) "An Investigation into the Effect of Cutting Tool Geometry on the Formation of Serrated Chips during Machining of Ti-6Al-4V: Finite Element Approach", Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, 11 (3) pp. 1131-1138 [TR Dizin] Link DOI
Oliaei, S.N.B., Karpat, Y. (2019) "Modelling and analysis of tool deflections in tailored micro end mills", International Journal of Mechatronics and Manufacturing Systems, 12 (1) p. 20 Link
Ayan, A., Turkay, D., Unlu, B., Naghinazhadahmadi, P., Oliaei, S.N.B., Boztug, C., Yerci, S. (2019) "Strain Engineering of Germanium Nanobeams by Electrostatic Actuation", SCIENTIFIC REPORTS, 9 (0) [SCI Expanded] Link DOI
Oliaei, S.N.B., Karpat, Y. (2018) "Polycrystalline diamond end mill cutting edge design to improve ductile-mode machining of silicon", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 51 (0) pp. 403-414 [SCI Expanded] Link DOI
Karpat, Y., Kanlı, M., Oliaei, S.N.B. (2018) "Mechanistic modeling of micro milling including tool run-out", Journal of the Faculty of Engineering and Architecture of Gazi University, 2018 (2018) pp. 771-781 [TR Dizin] Link
Oliaei, S.N.B., Karpat, Y., Paulo, D.J., Perveen, A. (2018) "Micro tool design and fabrication: A review", Journal of Manufacturing Processes, 36 (0) pp. 496-519 [SCI Expanded] Link
Oliaei, S.N.B., Karpat, Y. (2017) "Investigating the influence of friction conditions on finite element simulation of microscale machining with the presence of built-up edge", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 90 (0) pp. 819-829 [SCI Expanded] Link DOI
Oliaei, S.N.B., Karpat, Y. (2017) "Built-up edge effects on process outputs of titanium alloy micro milling", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 49 (0) pp. 305-315 [SCI Expanded] Link DOI
Jafarı, R., Kahya, M., Oliaei, S.N.B., Unver, H.O., Ozyurt, T.O. (2017) "Modeling and analysis of surface roughness of microchannels produced by mu-WEDM using an ANN and Taguchi method", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 31 (11) pp. 5447-5457 [SCI Expanded] Link DOI
Oliaei, S.N.B., Karpat, Y. (2016) "Influence of tool wear on machining forces and tool deflections during micro milling", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 84 (0) pp. 1963-1980 [SCI Expanded] Link DOI
Yavuz, C., Oliaei, S.N.B., Çetin, B., Çeliktaş, Ö.Y. (2016) "Sterilization of PMMA microfluidic chips by various techniques and investigation of material characteristics", JOURNAL OF SUPERCRITICAL FLUIDS, 107 (0) pp. 114-121 [SCI Expanded] Link DOI
Oliaei, S.N.B., Karpat, Y. (2016) "Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 235 (0) pp. 28-40 [SCI Expanded] Link DOI
Zeinali, S., Çetin, B., Oliaei, S.N.B., Karpat, Y. (2015) "Fabrication of continuous flow microfluidics device with 3D electrode structures for high throughput DEP applications using mechanical machining", ELECTROPHORESIS, 36 (13) pp. 1432-1442 [SCI Expanded] Link DOI
Kalajahi, M.H., Ahmadi, S.R., Oliaei, S.N.B. (2013) "Experimental and finite element analysis of EDM process and investigation of material removal rate by response surface methodology", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 69 (0) pp. 687-704 [SCI Expanded] DOI
Shabgard, M., Ahmadi, R., Seyedzavvar, M., Oliaei, S.N.B. (2013) "Mathematical and numerical modeling of the effect of input-parameters on the flushing efficiency of plasma channel in EDM process", INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, 65 (0) pp. 79-87 [SCI Expanded] DOI
Shabgard, M., Oliaei, S.N.B., Seyedzavvar, M., Najadebrahimi, A. (2011) "Experimental investigation and 3D finite element prediction of the white layer thickness, heat affected zone, and surface roughness in EDM process", JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 25 (12) pp. 3173-3183 [SCI Expanded] DOI
Shabgard, M., Mirsadegh, S., Oliaei, S.N.B. (2011) "Influence of Input Parameters on the Characteristics of the EDM Process", STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 57 (9) pp. 689-696 [SCI Expanded] DOI
Shabgard, M.R., Seyedzavvar, M., Oliaei, S.N.B. (2011) "A numerical method for predicting depth of heat affected zone in EDM process for AISI H13 tool steel", JOURNAL OF SCIENTIFIC INDUSTRIAL RESEARCH, 70 (7) pp. 493-499 [SCI Expanded]
Oliaei, S.N.B., Jafarı, R., Rohani, B., Mostafapour, A. (2008) "Investigation and Analysis of Weld Induced Residual Stresses in Two Dissimilar Pipes by Finite Element Modeling", Journal of Applied Sciences, 8 (6) pp. 1014-1020 Link
Bildiriler
Düz, N.B., Vargeloğlu, S., Yay, M.E., Çolak, Ö., Odeibat, W., Şahin, S., Uyanık, İ., Akar, S., Dinçer, P.R. (2021) "Yüksek Performanslı Hücre Germe Cihazı Geliştirilmesi", Tıbbi Biyoloji ve Genetik Kongresi , Çevrimiçi, Türkiye, (Ekim 2021)
Kahtir, F.A., Sadeghi, M.H., Akar, S. (2020) "Investigation of Surface Roughness in Laser-Assisted Hard Turning of AISI 4340", International Conference Exposition on Mechanical, Material and Manufacturing Technology , Hayderabad, Hindistan, (Ekim 2020)
Lotfi, N.R., Oliaei, S.N.B., Kilic, S.E. (2018) "FINITE ELEMENT MODELING OF MACHINING PARTICLE-REINFORCED ALUMINUM METAL MATRIX COMPOSITES", The 18th International Conference on Machine Design and Production , Türkiye, (Temmuz 2018)
Yılmaz, O.D., Oliaei, S.N.B., Dadvandipour, S. (2018) "PERFORMANCE ANALYSIS OF MICRO-END MILLS BASED ON VIBRATION APPLYING COMPUTER AIDED DESIGN ANALYSIS", The 6thInternational Scientific Conference on Advancesin Mechanical Engineering (ISCAME 2018) , (Ekim 2018)
Samad, D., Oliaei, S.N.B. (2018) "On the digital manufacturing development applying engineering informatics as a discipline of field study", 2018 19th International Carpathian Control Conference (ICCC) , (pp. 492-497), Szilvasvarad, Macaristan, (Haziran 2018)
Sadigh, B.L., Oliaei, S.N.B., Dadvandipour, S. (2017) "An Ontology Based Semantic Machine Tool Selection for Multi Scale Wire EDM Processes", 9th International Congress on Precision Machining (ICPM 2017) , (Ağustos 2017)
Eivazzadeh, M., Dadvandipour, S., Oliaei, S.N.B. (2017) "FINITE ELEMENT MODELING OF INCREMENTAL SHEET METAL FORMING OF ALUMINUM ALLOY AL 1100", XIV International Congress Machines.Technologies.Materials-Summer Session , (Eylül 2017)
Oliaei, S.N.B., Karpat, Y. (2016) "Fabrication of PCD Mechanical Planarization Tools by using mu-Wire Electrical Discharge Machining", 18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) , (pp. 311-316), Tokyo, Japonya, (Nisan 2016)
Oliaei, S.N.B., Karpat, Y. (2016) "Influence of WEDM Strategies on Surface Roughness of Tungsten Carbide", The 17th International Conference on Machine Design and Production , Türkiye, (Temmuz 2016)
Oliaei, S.N.B., Karpat, Y. (2014) "Experimental Investigations on Micro Milling of Stavax Stainless Steel", 6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) , (pp. 377-382), Berkeley, Amerika Birleşik Devletleri, (Haziran 2014)
Oliaei, S.N.B., Özdemir, C., Karpat, Y. (2013) "Fabrication of Micro Ball End Mills Using Micro Electro Discharge Machining", 7th International Conference and Exhibition on Design andProduction of MACHINES and DIES/MOLDS , Türkiye, (Haziran 2013)
Oliaei, S.N.B., Karpat, Y. (2012) "Multi-scale Milling Force Modeling through a Finite Element Simulation Based Metamodel", 15th International Conference on Machine Design and Production (UMTIK) , Türkiye, (Haziran 2012)
Karimzadeh, A., Yousefi, A., Hosseini, M., Jafarı, R., Oliaei, S.N.B. (2012) "Analysis of the Effect of Residual Stresses on Fatigue Life of Tubular Members by Finite Element Modeling", 15th International Conference on Machine Design and Production (UMTIK) , Pamukkale, Türkiye, (Haziran 2012)
Ergür, A., Oliaei, S.N.B., Karpat, Y. (2012) "Design and Fabrication of Micro Cutting Tools Using Micro Electro Discharge Machining (μ-EDM)", 15th International Conference on Machine Design and Production , Pamukkale, Türkiye, (Haziran 2012)
Dolatshahi, H., Oliaei, S.N.B., Sattari, M. (2011) "Finite Element Analysis of the Effect of Crater Wear on Machining Forces and Temperature", 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds , Ankara, Türkiye, (Haziran 2011)
Dadvandipour, S., Shotorbani, R., Oliaei, S.N.B. (2008) "Examination of Machining Parameters on the Machining Characteristics in EDM of Tool Steel with Different Type of Electrode Materials", The 13th International Conference on Machine Design and Production , Istanbul, Türkiye, (Eylül 2008)
Oliaei, S.N.B., Ahmadı, P.N., Rohani, B., Shotorbanı, R.M. (2008) "Numerical Simulation of Temperature Field and Residual Stresses in Multi-Pass T-Fillet Joint by Finite Element Method", The 13th International Conference on Machine Design and Production , (Eylül 2008)
Jafarı, R., Sadigh, B.L., Rohani, B., Oliaei, S.N.B. (2008) "ANALYSIS AND SIMULATION OF ON-LINE TOOL BREAKAGE DETECTION FROM FEED DRIVE CURRENT IN CNC LATHE", The 13th International Conference on Machine Design and Production , Istanbul, Türkiye, (Eylül 2008)
Kitaplar
Kayıt Yok
Kitap Bölümleri
Nasseri, B., Akar, S., Naseri, E. (2021) "Biomedical Applications of Microfluidic Devices", : Elsevier-Academic Press
Perveen, A., Akar, S. (2020) "Spark Erosion Machining MEMS to Aerospace", Amerika Birleşik Devletleri : CRC Press
Oliaei, S.N.B., Mukhtarkhanov, M., Perveen, A. (2020) "Advances in Abrasive BasedMachining and FinishingProcesses", : Springer
Oliaei, S.N.B., Nasseri, B. (2019) "Additive and Subtractive Manufacturing-Emergent Technologies", : DE GRUYTER
Oliaei, S.N.B., P, J.M., Perveen, A. (2018) "Micro-electrical Discharge Machining Processes", : Springer
Diğer Yayınlar
Kayıt Yok
Bilimsel Dergi Editörlükleri
Kayıt Yok
Bilimsel Yayınlarda Hakemlikler
Kayıt Yok
Bilimsel ve Mesleki Kuruluşlardaki Üyelikler
Kayıt Yok
Atıflar
Atıf bilgisi bulunmamaktadır
Ödüller
(2018) "Yeni Fikirler Yeni İşler (Takim: Microsolar)" T.C. Enerji Piyasası Düzenleme Kurumu (EPDK) ve Elektrik Dağıtım Hizmetleri Derneği (ELDER)
Kongre/Sempozyum Görevleri
Kayıt Yok
Kayıt Yok
Tasarımlar
Kayıt Yok
Sanatsal Etkinlikler
Kayıt Yok
Birlikte çalışılan kişi Aktif Dönem Çalışma Sayısı
-
2023 1
-
2023 1
-
2023 1
Yiğit Karpat
İhsan Doğramacı Bilkent Üniversitesi
2012 - 2019 15
Rahım Jafarı
Atılım Üniversitesi
2008 - 2017 4
Okan Deniz Yılmaz
Atılım Üniversitesi
2018 - 2023 4
Mırsadegh Seyedzavvar
Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi
2021 - 2023 4
Asma Perveen
-
2018 - 2020 4
Samad Dadvandipour
-
2008 - 2018 4
Babak Rohani
-
2008 3
Mohammad Hossein Sadeghi
-
2020 - 2022 3
Mohammadreza Shabgard
-
2011 - 2013 3
Cem Boğa
Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi
2021 - 2023 2
Barbaros Çetin
İhsan Doğramacı Bilkent Üniversitesi
2015 - 2016 2
Bahram Lotfi Sadigh
-
2008 - 2017 2
Behzad Nasseri
-
2019 - 2021 2
Farzad Ahmadi Kahtir
-
2020 - 2021 2
Hassan Ali M. Meshri
-
2021 2
Mirsadegh Seyedzavvar
-
2011 - 2013 2
Özlem Yeşil Çeliktaş
Ege Üniversitesi
2016 1
Pervin Rukiye Dinçer
Hacettepe Üniversitesi
2021 1
Selçuk Yerci
Orta Doğu Teknik Üniversitesi
2019 1
Samad Nadimi Bavil Oliaei
-
2011 1
Bahram Lotfısadıgh
-
2023 1
Ramazan Hakkı Namlu
-
2023 1
İsmail Uyanık
Hacettepe Üniversitesi
2021 1
Oğuzhan Ulucak
-
2023 1
Abdoullah Yousefi
-
2012 1
Ahmad Najadebrahimi
-
2011 1
Ali Karimzadeh
-
2012 1
Alican Ergür
-
2012 1
Alireza Araee
-
2020 1
Amir Mostafapour
-
2008 1
Andre Batako
-
2023 1
Arman Ayan
-
2019 1
Babak Sadizade
-
2020 1
Buse Unlu
-
2019 1
Cansu Yavuz
-
2016 1
Cem Özdemir
-
2013 1
Cicek Boztug
-
2019 1
Dadvandipour Samad
-
2018 1
Davim J Paulo
-
2018 1
Deniz Turkay
-
2019 1
Doruk Uğurer
-
2023 1
Erdinc Naseri
-
2021 1
Farzad Ahmadi Khatir
-
2022 1
Farzad Pashmforoush
-
2021 1
Habib Dolatshahi
-
2011 1
Hakki Ozgur Unver
-
2017 1
Jahan Muhammad P
-
2018 1
M. Seyedzavvar
-
2011 1
Mahmoudreza Eivazzadeh
-
2017 1
Mahyar Sattari
-
2011 1
Mehrdad Hosseini
-
2012 1
Mehrdad Hosseini Kalajahi
-
2013 1
Mohsen Emami
-
2023 1
Muammer Kanlı
-
2018 1
Muge Kahya
-
2017 1
Muslim Mukhtarkhanov
-
2020 1
Mustafa Ensar Yay
-
2021 1
Nakka Rake Lotfi
-
2018 1
Niloufar Boustanabadimaralan Düz
-
2021 1
Ömer Çolak
-
2021 1
Parisa Naghinazhadahmadi
-
2019 1
Parisa Naghinejad Ahmadı
-
2008 1
Ramin Mohammadpour Shotorbanı
-
2008 1
Ramin Shotorbani
-
2008 1
Reza Ahmadi
-
2013 1
Reza Najati Ilkhchi
-
2021 1
Sadik Engin Kılıç
-
2023 1
Sadik Engin Kilic
-
2018 1
Sadik Engin Kiliç
-
2021 1
Samrand Rash Ahmadi
-
2013 1
Selman Şahin
-
2021 1
Seyedzavvar Mirsadegh
-
2011 1
Sinan Vargeloğlu
-
2021 1
Soheila Zeinali
-
2015 1
Tuba Okutucu Ozyurt
-
2017 1
Vahid Hasan Nasab
-
2023 1
Vahid Rezaeizad Farshi
-
2020 1
Waleed Odeibat
-
2021 1