Post Doktora, Kanada, University Of Waterloo, , 2015, 2016 |
Doktora/Sanatta Yeterlilik/Tıpta Uzmanlık, Türkiye, Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, 2002, 2007 |
Yüksek Lisans, Türkiye, Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, 1999, 2002 |
Lisans, Türkiye, Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, 1994, 1999 |
İngilizce, ÜDS, 88, Bahar, 2009 |
Kayıt Yok |
[UAK] Mühendislik Malzeme ve Metalurji Mühendisliği Metalik Malzemeler |
[UAK] Mühendislik Malzeme ve Metalurji Mühendisliği Toz Metalurjisi |
[UAK] Mühendislik Malzeme ve Metalurji Mühendisliği Malzeme Bilimi |
[UAK] Mühendislik Malzeme ve Metalurji Mühendisliği Yapısal ve Fonksiyonel Malzemeler |
2021-, Profesör, Tam Zamanlı, Çankaya Üniversitesi, Rektörlük, Ortak Dersler Bölümü, Türkiye |
2014-, Doçent, Tam Zamanlı, Çankaya Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü, Malzeme ve Metalurji Mühendisliği, Türkiye |
2011-, Yardımcı Doçent, Tam Zamanlı, Çankaya Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü, Türkiye |
2009-2009, Öğretim Görevlisi, Tam Zamanlı, Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü, Türkiye |
2009-2010, Yardımcı Doçent, Tam Zamanlı, Çankaya Üniversitesi, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümü, Türkiye |
1999-2006, Araştırma Görevlisi, Tam Zamanlı, Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, Türkiye |
2021-, Üniversite Yönetim Kurulu Üyesi, Çankaya Üniversitesi, Türkiye |
2020-, Senato Üyesi, Çankaya Üniversitesi, Türkiye |
2020-, Enstitü Müdürü, Çankaya Üniversitesi, Türkiye |
2017-2017, Fakülte Kurulu Üyeliği, Çankaya Üniversitesi, Türkiye |
2017-, Bölüm Başkanı, Çankaya Üniversitesi, Türkiye |
2014-2015, Fakülte Yönetim Kurulu Üyeliği, Çankaya Üniversitesi, Türkiye |
2014-2015, Bölüm Başkan Yardımcısı, Çankaya Üniversitesi, Türkiye |
Nazlı Sıla Büyükatak, Yüksek Lisans, THE EFFECT OF AGING ON MECHANICAL PROPERTIES AND CORROSION RESISTANCE OF WE43 MAGNESIUM ALLOY, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı, 2024, (Asıl Danışman) |
Aysu Deniz Topak, Yüksek Lisans, PERFORMANCE ENHANCEMENT BY UTILIZATION OF NANOFLUIDS IN SOLAR COLLECTOR FOR APPLICATION IN HIGH PERF, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman) |
Elif Aybüke Öztürk, Yüksek Lisans, NİTRÜRLEME VE TERMO-HİDROJENLEME İŞLEMİNİN İŞLENMİŞ Tİ-6AL-4V ALAŞIMLARININ YORULMA DAVRANIŞI ÜZERİN, Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman) |
Burak Çelik, Yüksek Lisans, Characterization The Growth Mechanisms of Transparent Conductive Oxide Thin Films Deposited with PVD, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Mühendislik Bilimleri Ana Bilim Dalı, 2023, (Asıl Danışman) |
Merve Özkan, Yüksek Lisans, Production and Characterization of Ti-Based MXene Alloys, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı, 2023, (Asıl Danışman) |
Ege Mutlu, Yüksek Lisans, A DESIGN TOOL FOR INERTIAL MICROFLUIDICS-BASED MICROCHIPS, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı, 2021, (Asıl Danışman) |
Merve Nur Doğu, Yüksek Lisans, Production of Ti-6Al-4V alloy by 3D electron beam melting technique and development of its post trea, Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı, 2019, (Asıl Danışman) |
Oktay Çetinel, Doktora, Production and characterisation of titanium foam scaffolds as bone substitute materials, Hacettepe Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Ana Bilim Dalı, 2019, (Asıl Danışman) |
Yeter Özat, Yüksek Lisans, Tehlikeli madde taşımacılığında alınacak önlemler, Çankaya Üniversitesi, Fen Bilimleri Enstitüsü, İş Sağlığı ve Güvenliği Ana Bilim Dalı, 2018, (Asıl Danışman) |
Güney Mert Bilgin, Yüksek Lisans, Optimization of the mechanical properties of Ti-6Al-4V alloy produced by three dimensional additive, Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı, 2017, (Asıl Danışman) |
Elif Eda Yeni, Yüksek Lisans, Biyomalzeme uygulamalarında gözenekli Ti6Al4V alaşımının yüzey aktivasyonu ve karakterizasyonu, Anadolu Üniversitesi, Fen Bilimleri Enstitüsü, Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı, 2015, (Asıl Danışman) |
Simge Tülbez, Yüksek Lisans, Processing and characterization of carbon fiber reinforced silicon carbide (C/C-SiC) matrix composit, Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı, 2015, (Asıl Danışman) |
Ezgi Bütev, Yüksek Lisans, Production and characterization of surface treated biomedical Ti6Al7Nb alloy foams, Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı, 2015, (Asıl Danışman) |
2021-2022, MSE 427 Electronic, Optical and Magnetic Materials and Devices, Lisans |
2021-2022, MNT 501 Fundamentals of Nanotechnology, Yüksek Lisans |
2021-2022, MNT 590 Seminar, Yüksek Lisans |
2021-2022, MNT 599 Thesis, Yüksek Lisans |
2021-2022, MSE 235 Materials Science for Electronics Engineers, Lisans |
2020-2021, MNT 590 Seminar, Yüksek Lisans |
2020-2021, MNT 501 Fundamentals of Nanotechnology, Yüksek Lisans |
2020-2021, MNT 599 Thesis, Yüksek Lisans |
2020-2021, MSE 235 Materials Science for Electronics Engineers, Lisans |
2020-2021, MSE 427 Electronic, Optical and Magnetic Materials and Devices, Lisans |
2020-2021, MNT 503 Nanomaterials Synthesis and Characterization, Yüksek Lisans |
2020-2021, MSE 427 Electronic, Optical and Magnetic Materials and Devices, Lisans |
2019-2020, MNT 501 Fundamentals of Nanotechnology, Yüksek Lisans |
2019-2020, MSE 427 Electronic, Optical and Magnetic Materials and Devices, Lisans |
2019-2020, MNT 599 Thesis, Yüksek Lisans |
2019-2020, MNT 503 Nanomaterials Synthesis and Characterization, Yüksek Lisans |
2019-2020, MSE 406 Science and Technology of Nanostructures, Lisans |
2019-2020, MSE 235 Materials Science for Electronics Engineers, Lisans |
2019-2020, MNT 590 Seminar, Yüksek Lisans |
2019-2020, MNT 599 Thesis, Yüksek Lisans |
2018-2019, MNT 503 Nanomaterials Synthesis and Characterization, Yüksek Lisans |
2018-2019, MSE 225 Introduction to Materials Science, Lisans |
2018-2019, MSE 428 Materials for Biomedical Applications, Lisans |
2018-2019, MSE 408 Innovative Engineering Design and Implementation, Lisans |
2018-2019, MSE 406 Science and Technology of Nanostructures, Lisans |
2018-2019, MSE 310 Kinetics and Microstructural Evolution, Lisans |
2018-2019, MSE 407 Innovative Engineering Design and Technology, Lisans |
2018-2019, MSE 309 Phase Diagrams, Lisans |
2018-2019, MNT 501 Fundamentals of Nanotechnology, Yüksek Lisans |
2017-2018, MSE 310 Kinetics and Microstructural Evolution, Lisans |
2017-2018, MSE 402 Advanced Materials and Composites, Lisans |
2017-2018, MSE 408 Innovative Engineering Design and Implementation, Lisans |
2017-2018, MSE 206 Materials Characterization I, Lisans |
2017-2018, MNT 503 Nanomaterials Synthesis and Characterization, Yüksek Lisans |
2017-2018, ISG 599 Thesis, Yüksek Lisans |
2017-2018, MSE 426 Thermal Processing of Materials, Lisans |
2017-2018, MSE 407 Innovative Engineering Design and Technology, Lisans |
2017-2018, MSE 309 Phase Diagrams, Lisans |
2017-2018, ISG 599 Thesis, Yüksek Lisans |
2016-2017, MSE 407 Innovative Engineering Design and Technology, Lisans |
2016-2017, ISG 599 Thesis, Yüksek Lisans |
2016-2017, MSE 235 Materials Science for Electronics Engineers, Lisans |
2016-2017, MSE 309 Phase Diagrams, Lisans |
2016-2017, MSE 405 Introduction to Polymer Science and Technology, Lisans |
2016-2017, MSE 408 Innovative Engineering Design and Implementation, Lisans |
2016-2017, MSE 427 Electronic, Optical and Magnetic Materials and Devices, Lisans |
2016-2017, ISG 599 Thesis, Yüksek Lisans |
2016-2017, MSE 206 Materials Characterization I, Lisans |
2016-2017, MSE 310 Kinetics and Microstructural Evolution, Lisans |
2016-2017, MSE 426 Thermal Processing of Materials, Lisans |
2014-2015, MSE 225 Introduction to Materials Science, Lisans |
2014-2015, MSE 235 Materials Science for Electronics Engineers, Lisans |
2014-2015, MSE 309 Phase Diagrams, Lisans |
2014-2015, MSE 125 Materials Science and General Chemistry, Lisans |
2014-2015, MSE 206 Materials Characterization I, Lisans |
2014-2015, MSE 310 Kinetics and Microstructural Evolution, Lisans |
2013-2014, Materials Characterization I, Lisans |
2013-2014, MATERİALS SCİENCE AND GENERAL CHEMİSTRY, Lisans |
2013-2014, Materials Science and Engineering Orientation, Lisans |
2013-2014, INTRODUCTION TO MATERIALS SCIENCE, Lisans |
2013-2014, PHASE DIAGRAMS, Lisans |
2013-2014, DIFFUSION IN SOLIDS, Lisans |
2013-2014, Kinetics and Microstructural Evolution, Lisans |
2012-2013, GENERAL PHYSİCS FOR ENGİNEERİNG I, Lisans |
2012-2013, MATERİALS SCİENCE I, Lisans |
2012-2013, GENEL FİZİK II, Lisans |
2012-2013, GENERAL PHYSİCS FOR ENGİNEERİNG II, Lisans |
2012-2013, ENGINEERING MATERIALS, Lisans |
2012-2013, MATERIALS CHARACTERIZATION I, Lisans |
2012-2013, INTRODUCTION TO MATERIALS SCIENCE, Lisans |
2011-2012, GENERAL PHYSİCS FOR ENGİNEERİNG I, Lisans |
2011-2012, MATERİALS SCİENCE AND GENERAL CHEMİSTRY, Lisans |
2011-2012, GENERAL PHYSİCS FOR ENGİNEERİNG II, Lisans |
2010-2011, MANUFACTURİNG PROCESSES, Lisans |
2010-2011, MATERİALS SCİENCE AND GENERAL CHEMİSTRY (YAZ OKULU), Lisans |
2010-2011, SYSTEMS' DESİGN AND IMPLEMENTATİON, Lisans |
2010-2011, MATERİALS SCİENCE AND GENERAL CHEMİSTRY, Lisans |
2010-2011, SYSTEMS' ANALYSİS, Lisans |
2010-2011, INTRODUCTİON TO ENGİNEERİNG THERMODYNAMİCS, Lisans |
2009-2010, SYSTEMS' DESİGN AND IMPLEMENTATİON, Lisans |
2009-2010, MATERİALS SCİENCE AND GENERAL CHEMİSTRY, Lisans |
2009-2010, SYSTEMS' ANALYSİS, Lisans |
2009-2010, INTRODUCTİON TO ENGİNEERİNG THERMODYNAMİCS, Lisans |
2008-2009, Materials Science and General Chemistry (YAZ OKULU), Lisans |
2008-2009, METALLİC MATERİALS, Lisans |
2008-2009, Materials Science and General Chemistry, Lisans |
Kayıt Yok |
() Bir gözenekli titanyum ve alaşımlarının köpüklerini üretme yöntemi, BÖLÜM C Kimya; Metalürji |
Saltık, S., Esen, Z., Dericioğlu, A.F. (2022) "A Comparative Study of Effects of Additive Particle Size and Content on Wetting Behavior and Brazing Performance of C/SiC Composite", Journal of Materials Engineering and Performance, (0) [SCI Expanded] Link DOI |
Özer, S., Bilgin, M.G., Davut, K., Esen, Z., Dericioğlu, A.F. (2022) "Effect of post fabrication aging treatment on the microstructure, crystallographic texture and elevated temperature mechanical properties of IN718 alloy fabricated by selective laser melting", JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 306 (117622) [SCI Expanded] Link DOI |
Şimşek, Ü., Çoğun, C., Esen, Z. (2022) "Effects of electrolytic copper and copper alloy electrodes on machining performance in electrical discharge machining (EDM)", MACHINING SCIENCE AND TECHNOLOGY, (0) [SCI Expanded] Link DOI |
Saltık, S., Esen, Z., Dericioğlu, A.F. (2021) "Wetting behavior and reaction layer formation in C/SiC composite-titanium alloy joints", ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, (0) [ESCI] Link DOI |
Urtekin, L., Özerkan, H.B., Çoğun, C., Genç, A., Esen, Z. (2021) "Experimental Investigation on Wire Electric Discharge Machining of Biodegradable AZ91 Mg Alloy", Journal of Materials Engineering and Performance, 30 (10) pp. 7752-7761 [SCI Expanded] Link DOI |
Tülbez, S., Esen, Z., Dericioğlu, A.F. (2020) "Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites", Advanced Composites and Hybrid Materials, 3 (0) pp. 177-186 [SCI Expanded] Link DOI |
Esen, Z., Öcal, E.B., Akkaya, A., Gürçay, B., Özcan, C., Özgümüş, A.B., Duygulu, Ö., Dericioğlu, A.F. (2020) "Corrosion behaviours of Ti6Al4V-Mg/Mg-Alloy composites", Corrosion Science, 166 (0) p. 108470 [SCI Expanded] Link DOI |
Ezgi, B.Ö., Esen, Z., Aydınol, M.K., Dericioğlu, A.F. (2020) "Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys", MATERIALS CHEMISTRY AND PHYSICS, 241 (0) p. 122350 [SCI] Link DOI |
Doğu, M.N., Esen, Z., Davut, K., Tan, E., Gümüş, B., Dericioğlu, A.F. (2020) "Microstructural and texture evolution during thermo-hydrogen processing of Ti6Al4V alloys produced by electron beam melting", Materials Characterization, 168 (0) pp. 110549-110563 [SCI] Link DOI |
Cetinel, O., Esen, Z., Yıldırım, B. (2019) "Fabrication, Morphology Analysis, and Mechanical Properties of Ti Foams Manufactured Using the Space Holder Method for Bone Substitute Materials", Metals, 9 (3) p. 340 [SCI] Link DOI |
Bütev, E., Esen, Z. (2017) "Surface characteristics and in-vitro behavior of chemically treated bulk Ti6Al7Nb alloys", Surface and Coatings Technology, 309 (0) pp. 829-839 [SCI Expanded] Link DOI |
Köroğlu, L., Bütev, E., Esen, Z., Ayas, E. (2017) "A novel approach for synthesis of monticellite based bioactive ceramic powders from boron derivative waste", Materials Letters, 209 (0) pp. 315-318 [SCI Expanded] Link DOI |
Rona, N., Yenisey, M., Küçüktürk, G., Gürün, H., Çoğun, C., Esen, Z. (2017) "Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding", Journal of Prosthodontic Research, 61 (2) pp. 158-167 [SCI Expanded] Link DOI |
Atabay, S.E., Esen, Z., Dericioğlu, A.F. (2017) "Effect of Sn Alloying on the Diffusion Bonding Behavior of Al-Mg-Si Alloys", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48 (7) pp. 3181-3187 [SCI] DOI |
Bilgin, G.M., Esen, Z., Akin, S.K., Dericioğlu, A.F. (2017) "Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 700 (0) pp. 574-582 [SCI] DOI |
Çoğun, C., Esen, Z., Genç, A., Çoğun, F., Aktürk, N. (2017) "Effect of powder metallurgy Cu B4C electrodes on workpiece surface characteristics and machining performance of electric discharge machining", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, (0) [SCI Expanded] Link DOI |
Esen, Z., Öcal, E.B., Karakaş, M.S. (2016) "A comparative study on biodegradation and mechanical properties of pressureless infiltrated Ti/Ti6Al4V-Mg composites", Journal of the Mechanical Behavior of Biomedical Materials, 63 (0) pp. 273-286 [SCI Expanded] Link DOI |
Öcal, E.B., Esen, Z., Bor, Ş. (2016) "Characterization of Ti6Al7Nb alloy foams surface treated in aqueous NaOH and CaCl2 solutions", Journal of the Mechanical Behavior of Biomedical Materials, 60 (0) pp. 127-138 [SCI Expanded] Link |
Öcal, E.B., Esen, Z., Bor, Ş. (2015) "In vitro bioactivity investigation of alkali treated Ti6Al7Nb alloy foams", Applied Surface Science, 327 (0) pp. 437-443 [SCI] Link DOI |
Esen, Z. (2014) "Titanium magnesium based composites Mechanical properties and in vitro corrosion response in Ringer s solution", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 573 (0) pp. 119-126 [SCI] DOI |
Esen, Z. (2012) "The effect of processing routes on the structure and properties of magnesium TiNi composites", Materials Science and Engineering: A, 558 (0) pp. 632-640 [SCI] Link DOI |
Ziya, E., Şakir, B. (2011) "Characterization of Ti 6Al 4V alloy foams synthesized by space holder technique", Materials Science and Engineering: A, 528 (7) pp. 3200-3209 [SCI] Link DOI |
Ziya, E., Elif, T., Şakir, B. (2009) "Characterization of Loose Powder Sintered Porous Titanium and Ti6Al4V Alloy", Turkish Journal of Engineering and Environmental Science, 33 (0) pp. 207-219 DOI |
Z., E., Ş., B. (2007) "Processing of titanium foams using magnesium spacer particles", Scripta Materialia, 56 (5) pp. 341-344 [SCI] Link DOI |
Özer, S., Yalçın, M.A., Bilgin, M.G., Davut, K., Esen, Z., Dericioğlu, A.F. (2022) "Effect of Solution Heat Treatment on the Anisotropy of Microstructure, Texture and Mechanical Properties of Hastelloy X Fabricated by Laser Powder Bed Fusion", 21st International Metallurgy and Materials Congress , Türkiye, (Ekim 2022) |
Bilgin, M.G., Özer, S., Esen, Z., Dericioğlu, A.F. (2022) "Effects of Heat Treatment and Hot Isostatic Pressing on High Temperature Mechanical Properties of Ti-48Al-2Cr-2Nb Alloy Produced by Electron Beam Melting", 21st International Metallurgy and Materials Congress , Türkiye, (Kasım 2022) |
Tülbez, S., Esen, Z., Dericioğlu, A.F. (2021) "Effect Of Brazing Parameters On The Microstructural And Mechanical Characteristics Of Ceramic Matrix Composite/ Titanium Alloy Brazed Joints", 20th International Metallurgy & Materials Congress , İstanbul, Türkiye, (Haziran 2021) |
Doğu, M.N., Esen, Z., Davut, K., Tan, E., Gümüş, B., Dericioğlu, A.F. (2021) "Effect of Building Direction and Thermo-Hydrogen Processing on the Microstructure and Texture of Electron Beam Melting (EBM) Processed Ti6Al4V Alloy", 20th International Metallurgy & Materials Congress , İstanbul, Türkiye, (Haziran 2021) |
Özsoy, A., Keleş, M., Esen, Z., Dericioğlu, A.F. (2021) "Effect of Electro-Discharge Machining (EDM) on the Microstructure of Selective Laser Melting Processed 17-4 PH Stainless Steels", 20th International Metallurgy & Materials Congress , İstanbul, Türkiye, (Haziran 2021) |
Öcal, E.B., Esen, Z., Dericioğlu, A.F. (2021) "Production and Characterization of Mg and WE43 Infiltrated Ti6Al7Nb Matrix Composites", 20th International Metallurgy & Materials Congress , İstanbul, Türkiye, (Haziran 2021) |
Özer, S., Bilgin, G.M., Esen, Z., Dericioğlu, A.F. (2021) "Effect Of Post-Processing Heat Treatment On The Mechanical Properties Of Inconel 718 Fabricated By Selective Laser Melting (SLM)", 20th International Metallurgy & Materials Congress , İstanbul, Türkiye, (Haziran 2021) |
Özer, S., Bilgin, M.G., Esen, Z., Dericioğlu, A.F. (2019) "Improvement of the Mechanical Properties of Inconel718 Fabricated by Selective Laser Melting (SLM)", TMS 2019 148th Annual Meeting and Exhibition , San Antonio, Amerika Birleşik Devletleri, (Mart 2019) |
Doğu, M.N., Bilgin, G.M., Tan, E., Gümüş, B., Esen, Z., Dericioğlu, A.F. (2019) "Designing thermochemical processes for Ti6Al4V alloy produced by additive manufacturing techniques", 4th International Congress on 3D Printing (Addditive Manufacturing) Technologies and Digital Industry , Antalya, Türkiye, (Nisan 2019) |
Doğu, M.N., Esen, Z., Dericioğlu, A.F., Tan, E., Gümüs, B. (2019) "Production of Ti-6Al-4V Alloy by 3D Electron Beam Melting Technique and Development of its Post Treatments", TMS 2019 Annual Meeting Exhibition , San Antonio, Amerika Birleşik Devletleri, (Mart 2019) |
Kıran, G.S., Ünal, B., Tügen, T., Öcal, E.B., Esen, Z. (2018) "Structural and Functional Characterizatıon of MgO and Na-Based Coatıngs on Ti6Al4V Alloy", IMMC 2018, 19th International Metallurgy and Materials Congress , İstanbul, Türkiye, (Eylül 2018) |
Tülbez, S., Esen, Z., Dericioğlu, A.F. (2018) "Investigations on Alternative Matrix Materials Towards the Efficiency of SiC Formation in C/SiC Ceramic Composites", IMMC’19 International Metallurgy Materials Congress , (Ekim 2018) |
Bilgin, G.M., Esen, Z., Dericioğlu, A.F. (2018) "The Effect of Thermohydrogen Process on the Mechanical Properties of the Ti-6Al-4V Alloy Produced by Selective Laser Melting", IMMC’19 International Metallurgy Materials Congress , İstanbul, Türkiye, (Ekim 2018) |
Bütev, E., Esen, Z., Dericioğlu, A.F. (2018) "PRODUCTION AND CHARACTERIZATION OF Ti-Mg COMPOSITES FOR VARIOUS APPLICATIONS", IMMC’19. International Metallurgy Materials Congress , (Ekim 2018) |
Doğu, M.N., Esen, Z., Tan, E., Gümüş, B., Dericioğlu, A.F. (2018) "Property Development of EBM Processed Ti-6Al-4V Alloy Through Hydrogen Treatments", IMMC 2018, 19th International Metallurgy and Materials Congress , İstanbul, Türkiye, (Ekim 2018) |
İkiz, İ.M., Yantiri, E., Öcal, E.B., Duygulu, Ö., Esen, Z. (2018) "Formation of Titanium Oxide Layers Decorated by Gold Nanoparticles on the Surface of Ti6Al4V Alloy", IMMC 2018, 19th International Metallurgy and Materials Congress , İstanbul, Türkiye, (Ekim 2018) |
Atabay, S., Esen, Z., Dericioğlu, A.F. (2017) "Effect of Sn Alloying on Diffusion Bonding Behavior of Al-Mg-Si Alloy", TMS 2017, 146th Annual Meeting & Exhibition , San Diego, Amerika Birleşik Devletleri, (Şubat 2017) |
Akın, Ş.R.K., Esen, Z., Öcal, E.B. (2017) "Surface modification of titanium with silicon nitride", 15th Conference and Exhibition of the European Ceramic Society (ECerS2017) , Budapeşte, Macaristan, (Temmuz 2017) |
Bilgin, G.M., Esen, Z., Akin, S.K., Dericioğlu, A.F. (2017) "Tailoring the Mechanical Properties of Additively Manufactured Ti-6Al-4V Alloys by Post Processing", TMS 2017 146th Annual Meeting and Exhibition , San Diego, Amerika Birleşik Devletleri, (Mart 2017) |
Bilgin, M.G., Dericioğlu, A.F., Esen, Z., Akın, Ş.R.K. (2016) "Optimization of the Mechanical Properties of the Ti-6Al-4V Alloy Fabricated By Additive Manufacturing Using Thermochemical Processes", TMS 2016, 145th Annual Meeting & Exhibition , Tennessee, Amerika Birleşik Devletleri, (Şubat 2016) |
Bilgin, M.G., Esen, Z., Dericioğlu, A.F., Akın, Ş.R.K. (2016) "Microstructural Refinement of Ti-6Al-4V Alloy Fabricated by Additive Manufacturing Using Thermochemical Processes", 18th International Metallurgy and Materials Congress , İstanbul, Türkiye, (Eylül 2016) |
Tülbez, S., Esen, Z., Dericioğlu, A.F. (2016) "Optimization of Pyrolysis and Liquid Silicon Infiltration Parameters for the Processing of C/C-SiC Composites", 18th International Metallurgy and Materials Congress , İstanbul, Türkiye, (Eylül 2016) |
Esen, Z., Irannejad, M., Novodchuck, I., Wales, B., Sanderson, J. (2016) "Synthesis and characterization of reduced graphene oxide-gold hybrid nanostructures using femtosecond laser ablation", 7th International Conference on Optical, Optoelectronic and Photonic Materials and Applications , Montreal, Kanada, (Haziran 2016) |
Esen, Z., Albayrak, A., Bircan, H., Doğu, M.N., Gündoğmuş, P., Kahyaoğlu, B. (2015) "Structural And Functional Characterization of Surface Treated Biomedical Ti6al7nb Alloy Foams", PPM 2015 International Porous Powder Materials , İzmir, Türkiye, (Eylül 2015) |
Öcal, E.B., Esen, Z., Bor, A.Ş. (2015) "In-vitro studies of surface modified highly porous Ti6Al7Nb Alloys’", TMS 2015 144th Annual Meeting and Exhibition , Florida, Amerika Birleşik Devletleri, (Mart 2015) |
Esen, Z., Öcal, E.B., Yılmaz, E. (2015) "Production and Characterization of Mg-Based Composites", TMS 2015 144th Annual Meeting and Exhibition , Florida, Amerika Birleşik Devletleri, (Mart 2015) |
Yeni, E.E., Esen, Z., Turan, S. (2015) "Comparison of Apatite Deposition on the Surface of Titanium and Ti6Al4V Alloy Powders", TMS 2015 144th Annual Meeting and Exhibition , Florida, Amerika Birleşik Devletleri, (Mart 2015) |
Eda, Y.E., Ezgi, B., Emre, Y., Ziya, E., Servet, T. (2014) "Surface Treatment and Characterization of the Ti6Al4V Alloy Powders for Biomedical Applications", 17th International Metallurgy & Materials Congress (IMMC 2014) , İstanbul, Türkiye, (Eylül 2014) |
Öcal, E.B., Yeni, E.E., Yılmaz, E., Esen, Z., Bor, A.Ş. (2014) "Effect of Alkali Treatment Parameters on Surface Structures and Mechanical Properties of Porous Ti6Al7Nb Scaffolds’’", 14th International Metallurgy & Materials Congress , İstanbul, Türkiye, (Eylül 2014) |
Öcal, E.B., Yeni, E.E., Yılmaz, E., Esen, Z., Turan, S. (2014) "Characterization of Apatite Formation Ability of Alkali Treated Bulk Ti6Al7Nb Alloy by in-vitro Studies", 17th International Metallurgical and Materials Congress and Fair , İstanbul, Türkiye, (Eylül 2014) |
EZGİ, B., ŞAKİR, E.Z.B. (2014) "Surface activation of porous Ti6Al7Nb scaffolds", THERMEC 2013 , (pp. 120), Las Vegas, Amerika Birleşik Devletleri, (Aralık 2014) |
Esen, Z. (2014) "Investigation of Ti based composites and porous materials designed for biomedical applications", THERMEC 2013 , (pp. 176-177), Las Vegas, Amerika Birleşik Devletleri, (Aralık 2014) |
Esen, Z., Öcal, E.B. (2013) "Manufacturing and Characterization of Titanium, Ti6Al4V and Ti6Al7Nb Alloy Dental Implants with highly Porous Surfaces", 5th International Symposium of Advanced Protocols in Oral Implantology , Antalya, Türkiye, (Nisan 2013) |
Esen, Z. (2012) "Investigation of structure mechanical porperty relationship of porous titanium and titanium alloys", TMS 2012 collected Proceedings , (pp. 452), Orlando, Amerika Birleşik Devletleri, (Mart 2012) |
Esen, Z. (2011) "TiNi reinforced magnesium composites by powder metallurgy", TMS 2011 collected Proceedings , (pp. 457-462), San Diego, Amerika Birleşik Devletleri, (Şubat 2011) |
Esen, Z. (2011) "Biyomedikal Uygulamalar için Ti Mg Kompozitlerinin Geliştirilmesi", 6. International Powder Metallurgy Congress and Exhibition , (pp. 163-169), Ankara, Türkiye, (Ekim 2011) |
Esen, Z. (2010) "Biyomedikal Ti6Al4V alaşım köpüklerinin üretimi ve mekanik karakterizasyonu", Çankaya Üniversitesi 3.Mühendislik ve Teknoloji Smepozyumu , (pp. 199-207), Ankara, Türkiye, (Nisan 2010) |
Esen, Z. (2005) "Cu Al Alaşım Sisteminde Sinterleme Sırasında Gözenek Oluşumu", 12th Uluslararası metalurji ve malzeme kongresi , (pp. 332-339), İstanbul, Türkiye, (Eylül 2005) |
ZİYA, E., ELİF, T., ŞAKİR, B. (2005) "Biyomedikal uygulamalar için Gözenekli Titanyum ve Ti6Al4V Alaşımı Üretimi", 12. uluslararası metalurji ve malzeme kongresi , (pp. 204-211), İstanbul, Türkiye, (Eylül 2005) |
Esen, Z. (2005) "Su Verilmiş Ti6Al4V Alaşımında Yaşlanma Sırasında Mikroyapısal Gelişim", 12. uluslararası metalurji ve malzeme kongresi , (pp. 1745-1751), İstanbul, Türkiye, (Eylül 2005) |
Esen, Z., Ögel, B., Bor, A.Ş. (2002) "Toz metalurji yöntemiyle bakır bazlı şekil bellekli alaşımların üretimi", 11th International Metallurgical and Materials Congress , (Haziran 2002) |
Kayıt Yok |
Esen, Z., Dikici, B., Duygulu, Ö., Geridönmez, S.G. (2015) "Advances in Metallic Biomaterials: Tissues, Materials and Biological Responses", Berlin/Almanya : Springer-Verlag Berlin Heidelberg |
Kayıt Yok |
(Ulusal - Dergi) Cankaya University Journal of Science and Engineering, 2010, Editör |
(Uluslararası - Bilimsel Dergi) Applied Surface Science, 0 |
(Ulusal - Bilimsel Dergi) Anadolu University Journal of Science and Technology, 0 |
(Ulusal - Bilimsel Dergi) Selçuk University Journal of Science and Technology, 0 |
(Uluslararası - Diğer) 6. International Powder Metallurgy Congress and Exhibition, 0 |
(Ulusal - Diğer) Çankaya Üniversitesi 6. Mühendislik ve Teknoloji Sempozyumu, 0 |
(Uluslararası - Bilimsel Dergi) Materials Letters, 0 |
(Ulusal - Diğer) Çankaya Üniversitesi 7. Mühendislik ve Teknoloji Sempozyumu, 0 |
(Uluslararası - Bilimsel Dergi) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 0 |
(Uluslararası - Diğer) 17th International Metallurgy & Materials Congress, 0 |
Üye, Teknogirişim Derneği, 2013- |
Sıra | Yayın | Makale (WoS) |
Makale (ESCI) |
Makale (Scopus) |
Makale (TR Dizin) |
Kitap (Uluslararası) |
Kitap (Ulusal) |
Makale (Diğer) |
Toplam Atıf |
1 |
Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys
MATERIALS CHEMISTRY AND PHYSICS
|
45 | 0 | 0 | 0 | 0 | 0 | 45 | |
2 |
Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
12 | 0 | 0 | 0 | 0 | 0 | 12 | |
3 |
Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding
Journal of Prosthodontic Research
|
9 | 0 | 0 | 0 | 0 | 1 | 10 | |
4 |
Fabrication, Morphology Analysis, and Mechanical Properties of Ti Foams Manufactured Using the Space Holder Method for Bone Substitute Materials
Metals
|
6 | 0 | 0 | 0 | 0 | 0 | 6 | |
5 |
Effect of Sn Alloying on the Diffusion Bonding Behavior of Al-Mg-Si Alloys
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
5 | 0 | 0 | 0 | 0 | 0 | 5 | |
6 |
A novel approach for synthesis of monticellite based bioactive ceramic powders from boron derivative waste
Materials Letters
|
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
7 |
Surface characteristics and in-vitro behavior of chemically treated bulk Ti6Al7Nb alloys
Surface and Coatings Technology
|
1 | 0 | 0 | 0 | 0 | 0 | 1 |
(2019) "Tübitak Proje performans ödülü" |
(1999) "Metalurji ve Malzeme Bölümü birinciliği (1999)" ORTA DOĞU TEKNİK ÜNİVERSİTESİ |
Kayıt Yok |
Kayıt Yok |
Kayıt Yok |
Birlikte çalışılan kişi | Aktif Dönem | Çalışma Sayısı |
![]() ![]() |
2017 - 2022 | 4 |
![]() ![]() |
2016 - 2017 | 3 |
![]()
Arcan Fehmi Dericioğlu
![]() |
2016 - 2022 | 28 |
![]()
Ezgi Bütev
![]() |
2013 - 2021 | 16 |
![]()
Merve Nur Doğu
Atılım Üniversitesi
|
2015 - 2021 | 6 |
![]()
Mert Güney Bilgin
-
|
2016 - 2022 | 6 |
![]()
Seren Özer
-
|
2019 - 2022 | 5 |
![]()
Evren Tan
-
|
2018 - 2021 | 5 |
![]()
Kemal Davut
İzmir Yüksek Teknoloji Enstitüsü
|
2020 - 2022 | 4 |
![]()
Ali Şakir Bor
-
|
2002 - 2015 | 3 |
![]()
Berkay Gümüş
-
|
2018 - 2021 | 3 |
![]()
Bor Şakir
-
|
2005 - 2011 | 3 |
![]()
Elif Eda Yeni
-
|
2014 - 2015 | 3 |
![]()
Emre Yılmaz
-
|
2014 - 2015 | 3 |
![]()
Guney Mert Bilgin
-
|
2017 - 2018 | 3 |
![]()
Servet Turan
Eskişehir Teknik Üniversitesi
|
2014 - 2015 | 2 |
![]()
Asım Genç
![]() |
2017 - 2021 | 2 |
![]()
Simge Tülbez
-
|
2018 - 2021 | 2 |
![]()
BUTEV EZGİ
-
|
2014 | 2 |
![]()
Güney Mert Bilgin
-
|
2019 - 2021 | 2 |
![]()
Özgür Duygulu
-
|
2015 - 2020 | 2 |
![]()
Seniz Kushan Akin
-
|
2017 | 2 |
![]()
Simge Saltık
-
|
2021 - 2022 | 2 |
![]()
Simge Tülbez
-
|
2016 - 2020 | 2 |
![]()
Şakir Bor
-
|
2015 - 2016 | 2 |
![]()
Tarhan Elif
-
|
2005 - 2009 | 2 |
![]()
Murat Yenisey
![]() |
2017 | 1 |
![]()
Levent Urtekin
-
|
2021 | 1 |
![]()
Nizami Aktürk
![]() |
2017 | 1 |
![]()
Hacı Bekir Özerkan
-
|
2021 | 1 |
![]()
Burak Dikici
![]() |
2015 | 1 |
![]()
Hakan Gürün
![]() |
2017 | 1 |
![]()
Bilgehan Ögel
-
|
2002 | 1 |
![]()
Gökhan Küçüktürk
![]() |
2017 | 1 |
![]()
Berkay Gümüş
-
|
2019 | 1 |
![]()
Özgür Duygulu
-
|
2018 | 1 |
![]()
Levent Köroğlu
![]() |
2017 | 1 |
![]()
Ferah Çoğun
![]() |
2017 | 1 |
![]()
Bora Yıldırım
![]() |
2019 | 1 |
![]()
Mehmet Kadri Aydınol
![]() |
2020 | 1 |
![]()
Erhan Ayas
![]() |
2017 | 1 |
![]()
Andaç Özsoy
-
|
2021 | 1 |
![]()
Aslı Akkaya
-
|
2020 | 1 |
![]()
Aslı Burcu Özgümüş
-
|
2020 | 1 |
![]()
Aydın Albayrak
-
|
2015 | 1 |
![]()
Benji Wales
-
|
2016 | 1 |
![]()
Bensu Gürçay
-
|
2020 | 1 |
![]()
Berkay Gümüs
-
|
2019 | 1 |
![]()
Bor Ş.
-
|
2007 | 1 |
![]()
Burak Ünal
-
|
2018 | 1 |
![]()
Buse Kahyaoğlu
-
|
2015 | 1 |
![]()
Bütev Öcal Ezgi
-
|
2020 | 1 |
![]()
Ceren Özcan
-
|
2020 | 1 |
![]()
Ezgi Yantiri
-
|
2018 | 1 |
![]()
Gülberk Selin Kıran
-
|
2018 | 1 |
![]()
Hande Bircan
-
|
2015 | 1 |
![]()
Inna Novodchuck
-
|
2016 | 1 |
![]()
İdil Meriç İkiz
-
|
2018 | 1 |
![]()
Joseph Sanderson
-
|
2016 | 1 |
![]()
M. Alp Yalçın
-
|
2022 | 1 |
![]()
Mehrdad Irannejad
-
|
2016 | 1 |
![]()
Mert Keleş
-
|
2021 | 1 |
![]()
Mustafa Serdar Karakaş
-
|
2016 | 1 |
![]()
Nergiz Rona
-
|
2017 | 1 |
![]()
Oktay Cetinel
-
|
2019 | 1 |
![]()
Pelin Gündoğmuş
-
|
2015 | 1 |
![]()
Serap Güngör Geridönmez
-
|
2015 | 1 |
![]()
Sıla Atabay
-
|
2017 | 1 |
![]()
Sila Ece Atabay
-
|
2017 | 1 |
![]()
Teksen Tügen
-
|
2018 | 1 |
![]()
Turan Servet
-
|
2014 | 1 |
![]()
Ülke Şimşek
-
|
2022 | 1 |
![]()
Yeni Elif Eda
-
|
2014 | 1 |
![]()
Yılmaz Emre
-
|
2014 | 1 |